Anbieter: MOSKERA

Magnetic ASYMMETRIC fly screen

109,99 €69,64 €Im Angebot
Colour
Frame dimensions (W x H)
Number of central separations
Menge

Beschreibung

MOSKERA Magnetic asymmetric fly screen, made to measure

The premium solution for openings with different heights (sloped roof, covered terrace, unusual opening), with the option of different widths, sloped / uneven floor (e.g. “V”-shaped floor), and options on request.

Made-to-measure asymmetric Options on request Magnetic closure 1. Designed for different heights

The asymmetric version is ideal when one end is higher than the other: sloped roof, covered terrace, conservatory, non-standard opening. The result: a fly screen that matches the reality of your opening.

  • Fewer gaps / better protection
  • A cleaner finish than a cut-down “standard” screen
  • Everyday comfort (smooth passage)
2. Different widths: possible on request

You can also have an opening that is asymmetric in width (for example, a protrusion on one side). In that case we adapt the cut and the configuration: just send us the necessary information.

  • Millimetre-precise fit (round up to the nearest cm)
  • Suitable for large widths and unusual openings
  • Truly made-to-measure manufacturing
3. Sloped / uneven floor (e.g. “V”): possible

A common case outdoors: a floor that is not perfectly straight. We can make a suitable fly screen, even if the bottom is sloped or “V”-shaped (centre lower than the sides).

  • Better seal at the bottom
  • Less gap for insects
  • A cleaner finish than a makeshift solution
4. Closure & separations: fully modular

Depending on your needs, we can add magnetic central separations (multi-panel), or zips placed wherever you like.

  • Magnetic central separation (easy passage)
  • Zips: targeted opening, practical depending on use
  • Configuration on request (specify in the comments)
5. Wind option: reinforced weights at the bottom

For exposed areas (draughts, terrace, seaside), we can add more weight to the bottom of the fly screen to improve wind resistance.

  • Better stability
  • Less flapping
  • Improved comfort of use
6. Ideal for
  • Terraces with a sloped roof
  • Openings with left height ≠ right height
  • Unusual openings (conservatory, extension, pergola)
  • Sloped / uneven floor (on request)
Measurements required for the asymmetric model 3 essential measurements

To make your made-to-measure asymmetric fly screen, we need 3 dimensions:

  • Total width (W): from end to end
  • Lowest height (H low): the shorter side
  • Highest height (H high): the taller side
To specify in the comments (if relevant)
  • Different widths: indicate the width measured at each end + any useful info.
  • Sloped floor: indicate the difference (e.g. “+6 cm on the left”).
  • “V”-shaped floor: indicate the difference between the centre and the sides (e.g. “centre 10 cm lower”).
  • Options: zips (location), magnetic central separations (number), reinforced weights at the bottom.

For more information, see the "how to measure" page. 👇